Damir72
12.05.2012, 13:15
Ребята,перепостю)
В общем,хочу установить на xray t3'11 CS и написал на форум 1 чувачкеле)(тот отлично делает шасськи,в теме)
В общем,что он ответил:
T3 has standard 1.9 internal ratio 38/20 front and back.
1.9 rear ratio is very fast already, you just need to increase the front ratio that means underdrive the front.
It's very easy and simple to covert your T3 drifter into CS drifter.
You just need to 2 parts front pulley and front belt.
I suggest 12T center pulley for the front and keep the rear stock.
38/12 = 3.16 front
38/20 = 1.9 rear (stock)
3.16/1.9 = 1.66 that's 66% cs fast and stable.
Where you can buy the pulley? I have to look around...
Stock front belt is 171T with 20Tpulley, now 12T pulley with what belt?
После я написал,что заднил спул на шасське уменьшен на 34Т и он написал:
So your rear is 34/20 = 1.7
You can also use 14T front center pulley
38/14 = 2.72 front
34/20 = 1.70 rear
2.71/1.70 = 1.6 that's 60% cs
You need to modify the 14t pulley to fit to your T3
I found this plastic 14T:http://www.hotbodiesonline.com/piw.php?partNo=hb70017&lang=en
Спросил,также,какой кс будет "нормальным"-сказал,что любой в пределах 50-70%,после чего стоит сфокусироваться на настройке подвески.
В итоге,какую запчасть надо заменить,че-то я не догоняю?)
Сильно не пинать,так как исчо новичок в этом)))
На шасське,кстати,стоит по типу "ролика",-
А так же увидел такую тему на циклоне-
сильно ли отличается от той,что стоит на иксрэе?
P.s.:хочу кс в пределах 57-66%
В общем,хочу установить на xray t3'11 CS и написал на форум 1 чувачкеле)(тот отлично делает шасськи,в теме)
В общем,что он ответил:
T3 has standard 1.9 internal ratio 38/20 front and back.
1.9 rear ratio is very fast already, you just need to increase the front ratio that means underdrive the front.
It's very easy and simple to covert your T3 drifter into CS drifter.
You just need to 2 parts front pulley and front belt.
I suggest 12T center pulley for the front and keep the rear stock.
38/12 = 3.16 front
38/20 = 1.9 rear (stock)
3.16/1.9 = 1.66 that's 66% cs fast and stable.
Where you can buy the pulley? I have to look around...
Stock front belt is 171T with 20Tpulley, now 12T pulley with what belt?
После я написал,что заднил спул на шасське уменьшен на 34Т и он написал:
So your rear is 34/20 = 1.7
You can also use 14T front center pulley
38/14 = 2.72 front
34/20 = 1.70 rear
2.71/1.70 = 1.6 that's 60% cs
You need to modify the 14t pulley to fit to your T3
I found this plastic 14T:http://www.hotbodiesonline.com/piw.php?partNo=hb70017&lang=en
Спросил,также,какой кс будет "нормальным"-сказал,что любой в пределах 50-70%,после чего стоит сфокусироваться на настройке подвески.
В итоге,какую запчасть надо заменить,че-то я не догоняю?)
Сильно не пинать,так как исчо новичок в этом)))
На шасське,кстати,стоит по типу "ролика",-
А так же увидел такую тему на циклоне-
сильно ли отличается от той,что стоит на иксрэе?
P.s.:хочу кс в пределах 57-66%