Переведите настройку машины "на пальцах"
HotBodies Cyclone Counter-Steer setup Version 2
Front Set-up:
Tc5 front 40t diff gear #ASC 31169
Tamiya 15t center #50878
Rear Set-up:
YOKOMO 33T DIFF PULLEY #ZR-543-33
Hpi r 40 pulley set # 73477
Set-up starting point
Parts used:
Front set-up --- 40t diff pulley (tc5 parts) and 15t center pulley (tamiya or hpi)
Rear set-up --- 33t diff pulley ( yokomo parts) and 23t center pulley (hpi r40 parts)
Update: Cyclone belt count
Cyclone and Cyclone-S 169T front 62T rear
Cyclone TC 170T front 63T rear
33/23 with 62T belt fits perfect.
Set-up starting point
Front diff a little loose
Rear diff locked
Springs use same rate springs
Front weights 2 oz
Rear weights 2 oz if you are using lipo's
-3 Front camber ---- may vary from tires and track surface
-1 Rear camber ---- may vary from tires and track surface
4mm Kickup
0 Front toe block
3 Rear toe block
Motor 8.5 ss sport
18t Pinion
78t Spur
добавлено через 1 минуту
И если не трудно тыкните носом на всякие обгонки и что это значит! Пожалуйста без флуда и дрифтовых кристаллов! я и так очень много тут читаю и практически вопросов не задаю!
Последний раз редактировалось xploid; 22.03.2010 в 19:50.
Причина: Добавлено сообщение
|