Регулятор, мотор (нового типа) и программатор
HobbyWing EZRUN-60A ESC
Output: Continuous current 60A, burst current 380A.
Input: 4-9 cells NiMH/NiCd or 2-3 cells LiPo.
BEC Output: 6V/1.5A.
Resistance: 0.0007 Ohm.
Motor Supported: Sensorless Brushless Motor
Suitable Brushless Motor:
With 4-6 cells NiMH/NiCd or 2 cells Lipo: On-Road≥5.5T, Off-Road≥8.5T;
With 6-9 cells NiMH/NiCd or 3 cells Lipo: On-Road≥8.5T, Off-Road≥13T;
Suitable Car: 1/12, 1/10 on-road or off-road cars / trucks for normal race or sportful race.
Size: 31.5mm(L) * 27.5mm(W) * 24mm(H).
Weight: 32g(Without wires)
EZRUN 8.5T/SL-3650
Feature of 8.5T/SL Sensorless Brushless Motor
- Top quality materials:
Aluminium shell (case)
High quality magnets
Copper wires of high temperature endurance
Good quality bearings
- Dustproof design.
- Big output power.
Specification of 8.5T/SL-3650 Sensorless Brushless Motor
- Rpm(Kv): 4000
- Battery Type: NiCd/ Nimh/ Li- Polymer Battery
- Shaft Length: 15mm
- Shaft Diameter: 3.17mm
- Motor Diameter: 36mm
- Total Length: 50mm
- Net Weight: 165g
Feature of LED Program Card
- Running Mode
- Drag Brake Force
- Low Voltage Cut-Off Threshold
- Start Mode
- Maximum Brake Force
- Maximum Reverse Force
- Initial Brake Force
- Throttle Neutral Range
- Timing
- Over-Heat Protection
- Motor Rotation
- Lipo Cells
Комплектация:
- 60A (V2.0) Electric Sensorless Brushless Speed Controller x 1
- 8.5T/SL-3650 Sensorless Brushless Motor x 1
- LED Program Card x 1
- User Manual, sticker
Цена 4800 рублей