1. Регулятор Ezrun 60A, мотор 8.5T (13.5 или 17.5T) и программатор
http://www.rc-carbon.ru/components/c...eee97eeeb0.jpg
http://www.rc-carbon.ru/components/c...eeeb0a7632.jpg
HobbyWing EZRUN-60A ESC

Output: Continuous current 60A, burst current 380A.
Input: 4-9 cells NiMH/NiCd or 2-3 cells LiPo.
BEC Output: 6V/1.5A.
Resistance: 0.0007 Ohm.
Motor Supported: Sensorless Brushless Motor
Suitable Brushless Motor:
With 4-6 cells NiMH/NiCd or 2 cells Lipo: On-Road≥5.5T, Off-Road≥8.5T;
With 6-9 cells NiMH/NiCd or 3 cells Lipo: On-Road≥8.5T, Off-Road≥13T;
Suitable Car: 1/12, 1/10 on-road or off-road cars / trucks for normal race or sportful race.
Size: 31.5mm(L) * 27.5mm(W) * 24mm(H).
Weight: 32g(Without wires)

EZRUN 8.5T/SL-3650
Feature of 8.5T/SL Sensorless Brushless Motor
- Top quality materials:
Aluminium shell (case)
High quality magnets
Copper wires of high temperature endurance
Good quality bearings
- Dustproof design.
- Big output power.

Specification of 8.5T/SL-3650 Sensorless Brushless Motor
- Rpm(Kv): 4000
- Battery Type: NiCd/ Nimh/ Li- Polymer Battery
- Shaft Length: 15mm
- Shaft Diameter: 3.17mm
- Motor Diameter: 36mm
- Total Length: 50mm
- Net Weight: 165g


Feature of LED Program Card
- Running Mode
- Drag Brake Force
- Low Voltage Cut-Off Threshold
- Start Mode
- Maximum Brake Force
- Maximum Reverse Force
- Initial Brake Force
- Throttle Neutral Range
- Timing
- Over-Heat Protection
- Motor Rotation
- Lipo Cells

Комплектация:
- 60A (V2.0) Electric Sensorless Brushless Speed Controller x 1
- 8.5T/SL-3650 Sensorless Brushless Motor x 1
- LED Program Card x 1
- User Manual, sticker

Цена 4600 рублей

2. Ezrun 35A & 9Т

http://www.rc-carbon.ru/components/c...a88f4c4d4c.jpg

HobbyWing EZRUN-35A ESC

Output: Continuous current 35A, burst current 190A.
Input: 4-9 cells NiMH/NiCd or 2-3 cells LiPo.
BEC Output: 6V/1.5A.
Resistance: 0.0015 Ohm.
Motor Supported: Sensorless Brushless Motor
Suitable Brushless Motor:
With 4-6 cells NiMH/NiCd or 2 cells Lipo: On-Road≥9T, Off-Road≥12T;
With 6-9 cells NiMH/NiCd or 3 cells Lipo: On-Road≥12T, Off-Road≥18T;
Suitable Car: 1/12, 1/10 on-road or off-road cars / trucks for normal race or sportful race.
Size: 31.5mm(L) * 27.5mm(W) * 24mm(H).
Weight: 30g(Without wires)

EZRUN 9T/SL-3650M

Двигатель данного класса создан на основе двигателей 380 класса, но внешние размеры за счет установки корпуса с радиатором увеличены до размеров двигателя 540 класса. Это позволяет использовать данные двигатели во всех шасси масштабов 1:10 и 1:12.


Feature of 9T/SL Sensorless Brushless Motor
- Top quality materials:
Aluminium shell (case)
High quality magnets
Copper wires of high temperature endurance
Good quality bearings
- Dustproof design.
- Big output power.

Specification of 9T/SL-3650M Sensorless Brushless Motor
- Rpm(Kv): 4300
- Battery Type: NiCd/ Nimh/ Li- Polymer Battery
- Shaft Length: 15mm
- Shaft Diameter: 3.17mm
- Motor Diameter: 36mm
- Total Length: 50mm
- Net Weight: 165g


Feature of LED Program Card
- Running Mode
- Drag Brake Force
- Low Voltage Cut-Off Threshold
- Start Mode
- Maximum Brake Force
- Maximum Reverse Force
- Initial Brake Force
- Throttle Neutral Range
- Timing
- Over-Heat Protection
- Motor Rotation
- Lipo Cells

Комплектация:
- 35A (V2.0) Electric Sensorless Brushless Speed Controller x 1
- 9T/SL-3650M Sensorless Brushless Motor x 1
- LED Program Card x 1
- User Manual, sticker

Цена 3700 рублей