rodeo
26.07.2009, 15:20
продам в СПБ проф.зарядное устройство CTX-C Cell Master Andy Moore+ блок питания к нему!
цена 4000 руб.
MAIN FEATURES
PEAK CHARGE.................Super linear charge(3 memories-customizable)
CTX CHARGE....................1/3-2/3-3/3 step charge(3steps charge, 3memories-customizable)
Li-Ion &Polimer CHARGE....upto 11.1V(3cell), 1A charge, discharge
DISCHARGE.......................0.1~10A , 0.1~6.0V cutoff
CYCLE...............................up to 3 times repeatition
LAST DATA........................save CHG, DCH, CYC data
Input..................................DC 10.0-16V
Cell nunber.........................1-8cells, 0.1-10A charge, 0.1-10A discharge
CM has current limit as belows.
Charge
1cell 0.1~5A
2cell 0.1~6.5A
3cell 0.1~8A
4-8 0.1~10A
Discharge
1~6cell 0.1~10A
7cell 0.1~8A
8cell 0.1~6A
Cycle(1~3times), Latest data display.
Peak sensitivity 3mV/pack~99mV/pack, Zero delta peak
Auto start timer charge(count down)
Auto repeak(0~3) comes with delay time and capacity limit
Trickle(on/off)-0.1A
Flex charge(off~9steps)
Temp. sensor included.(15~70deg.C)
Temp. start(for cold batteries)
Capacity cut, Temp cut, Peak cut,Negavolt (one of four messege is shown after charge)
Key tones off~3,
3 kind of selectable melody for start, end, error.
IC controlled cooling dual ball bearing fans.
Charge Amp, capacity, delta peak, Temp. cutoff, fan starting Temp. values can be changed during Peak charge.
Black back lit LCD, Gold plated alligator clips in/output, Blue state indicator LED
Fan/Battery warmer control output
Easy key operations
Input and output protection against overloads, reverse polarity and short circuits,low or high input voltage, low battery temperature.
Also, the auto restart system after power failure.
http://www.micromachine.ru/product_info.php?cPath=6_604&products_id=8123
http://www.muchmoreracing.com/store/index.php?main_page=product_info&cPath=39_73&products_id=1410
цена 4000 руб.
MAIN FEATURES
PEAK CHARGE.................Super linear charge(3 memories-customizable)
CTX CHARGE....................1/3-2/3-3/3 step charge(3steps charge, 3memories-customizable)
Li-Ion &Polimer CHARGE....upto 11.1V(3cell), 1A charge, discharge
DISCHARGE.......................0.1~10A , 0.1~6.0V cutoff
CYCLE...............................up to 3 times repeatition
LAST DATA........................save CHG, DCH, CYC data
Input..................................DC 10.0-16V
Cell nunber.........................1-8cells, 0.1-10A charge, 0.1-10A discharge
CM has current limit as belows.
Charge
1cell 0.1~5A
2cell 0.1~6.5A
3cell 0.1~8A
4-8 0.1~10A
Discharge
1~6cell 0.1~10A
7cell 0.1~8A
8cell 0.1~6A
Cycle(1~3times), Latest data display.
Peak sensitivity 3mV/pack~99mV/pack, Zero delta peak
Auto start timer charge(count down)
Auto repeak(0~3) comes with delay time and capacity limit
Trickle(on/off)-0.1A
Flex charge(off~9steps)
Temp. sensor included.(15~70deg.C)
Temp. start(for cold batteries)
Capacity cut, Temp cut, Peak cut,Negavolt (one of four messege is shown after charge)
Key tones off~3,
3 kind of selectable melody for start, end, error.
IC controlled cooling dual ball bearing fans.
Charge Amp, capacity, delta peak, Temp. cutoff, fan starting Temp. values can be changed during Peak charge.
Black back lit LCD, Gold plated alligator clips in/output, Blue state indicator LED
Fan/Battery warmer control output
Easy key operations
Input and output protection against overloads, reverse polarity and short circuits,low or high input voltage, low battery temperature.
Also, the auto restart system after power failure.
http://www.micromachine.ru/product_info.php?cPath=6_604&products_id=8123
http://www.muchmoreracing.com/store/index.php?main_page=product_info&cPath=39_73&products_id=1410